Two Layer Drip Irrigation Pipe Making Machine/Drip Irrigation Pipe
Production Line
Drip irrigation is today's need because Water-nature's gift to
mankind is not unlimited and free forever. World water resources
are fast diminishing. The one and only answer to this problem is
the drip irrigation systems.
Two layer drip irrigation pipe production line is specially designed for production of two layer drip irrigation
pipe. The inner thick layer is black with recycled PE material; and
outer layer is light brown with virgin PE material.
With this special pipe structure, the drip irrigation pipe can have
nice surface, and recycled material can be used also to reduce the
production cost.
Technical Features of Pipe Production Line:
1)Two layer co-extrusion die head is applied with two extruders,
one is for inner black layer and one for outer brown layer.
The outer layer thickness can be 0.1mm-0.2mm, or be specially
designed as per customer requirements.
2)Dripper distance can be adjusted freely according to demands of
different crops, generally range from 20cm to 200cm.
Minimum dripper space can be 10cm for our high speed drip
irrigation pipe line.
3)Mechanical punching system or servo punching system is used in
our normal speed line and high speed line.
Two holes punching is as standard configuration. Three or Four or
Six holes punching are also workable for our 20m/min pipe line. We
can design the punching machine system as per customer’s local
market requirements.
4)Production speed: mainly two different production speed is
provided. One is 20m/min with low investment cost; another is
80m/min with high production efficiency.
Technical Data of Pipe Production Line:
Line Model | Screw Diameter | L/D | Production Scope | Production Speed | Nominal Power |
SJ-80 | Ф80mm | 33:1 | Ф8-20mm | 80m/min | 130KW |
SJ-45 | Ф45mm | 30:1 | Ф8-20mm | 20m/min | 37KW |
